Author Topic: Anyone have the correct Honda bullet connectors?  (Read 4696 times)

0 Members and 3 Guests are viewing this topic.

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,232
Anyone have the correct Honda bullet connectors?
« on: August 16, 2016, 01:14:40 PM »
** This is for a 350 twin, but the information might be useful for the fours, too.**

 I'm looking for someone that can "restore" the bullet connectors on my controls and tach. It looks like someone maybe extended the wiring for ape-hangers or something (and did a crappy job of it), but the controls and stuff are in good shape. I just need the factory bullet connectors put back on.
 I've PM'd a couple of guys from other forums that make custom wiring harnesses, etc., but was wondering if there's anyone around here that can get the correct connectors to put back on the wires? Anyone around here do custom harnesses or have a contact? I'd prefer to just send them my stuff and have them do it correctly, if possible.



'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline Wingnut74

  • Full Member
  • *
  • Posts: 73
Re: Anyone have the correct Honda bullet connectors?
« Reply #1 on: August 16, 2016, 01:23:34 PM »
Cycleterminal.com is great for the connectors on our bikes (3.5mm) - everything I have needed male, female, doubles. Quality is very good and way better, for example, than the crap too soft metal connectors that come on junk parts like Non-OEM coils. Used tons of them from these guys -
74 CB360 - Winter 2014/2015 Project
74 CB750 - Winter 2015/2016 Project
70 Something TBD - Winter 2016/2017 Project

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Anyone have the correct Honda bullet connectors?
« Reply #2 on: August 16, 2016, 01:24:24 PM »
vintageconnections.com
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,232
Re: Anyone have the correct Honda bullet connectors?
« Reply #3 on: August 16, 2016, 01:36:13 PM »
 I already have this crimping tool. Would it work with the connectors I need?

 (Edit: It looks like I need the Open Barrel die set and they don't sell that separately. Guess I'll have to get the crimping tool.)


« Last Edit: August 16, 2016, 02:08:01 PM by Scott S »
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Re: Anyone have the correct Honda bullet connectors?
« Reply #4 on: August 16, 2016, 01:37:20 PM »
Yep, I'm the kid that figured out how to put things back together...eventually.

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,610
Re: Anyone have the correct Honda bullet connectors?
« Reply #5 on: August 16, 2016, 01:41:07 PM »
+3 they are a perfect fit from vintage connection and come with the plastic covers which are needed on some connections.
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,109
  • Sunny Central Florida
Re: Anyone have the correct Honda bullet connectors?
« Reply #6 on: August 16, 2016, 06:17:09 PM »
I already have this crimping tool. Would it work with the connectors I need?

No

Edit: It looks like I need the Open Barrel die set and they don't sell that separately. Guess I'll have to get the crimping tool.

That is correct.

Here is a link to a write up I did about using the open barrel crimp tool:

http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Online HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,863
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Anyone have the correct Honda bullet connectors?
« Reply #7 on: August 16, 2016, 06:28:18 PM »
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline alacrity

  • Expert
  • ****
  • Posts: 929
  • Ride, Optimize, Repeat
Re: Anyone have the correct Honda bullet connectors?
« Reply #8 on: August 17, 2016, 11:57:04 PM »
+4. Vintage connections
The right stuff from a good guy.
I recently restored and sold a 77 cb750f, and am nearly finished with a (former basket case) cb750k5.  This is a place to share, learn and enjoy.  I am grateful to and for 99+% of this site's membership.

Offline Trevor from Warragul

  • Expert
  • ****
  • Posts: 1,085
Re: Anyone have the correct Honda bullet connectors?
« Reply #9 on: August 18, 2016, 02:35:07 AM »
I bought a Vintage Connections set many years ago, & it never ceases to amaze me how often I still use it!
1971 Kawasaki H1A
1972 Honda CB350F
1976 Moto Morini 3 1/2 Sport
1978 Honda CBX
1997 Suzuki Bandit 1200
1999 Ducati Monster 750

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: Anyone have the correct Honda bullet connectors?
« Reply #10 on: August 18, 2016, 06:44:15 AM »
You being in SC it might be faster and cheaper shipping from cycleterminal.com since they're in NJ. Vintageconnections.com is from CA. I've ordered a lot of stuff from cycle terminal, love those guys!

I also got wire from Wirebarn.com. Great GXL and TXL wire in a lot of colors.

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Anyone have the correct Honda bullet connectors?
« Reply #11 on: August 18, 2016, 07:43:33 AM »
I already have this crimping tool. Would it work with the connectors I need?

No

Edit: It looks like I need the Open Barrel die set and they don't sell that separately. Guess I'll have to get the crimping tool.

That is correct.

Here is a link to a write up I did about using the open barrel crimp tool:

http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494


Nice write-up! A youtube vid would be a great addition too. I love youtube how-to vids!  ;)
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline RainCityRider

  • BRAAAP!
  • Enthusiast
  • **
  • Posts: 139
  • instagram @raincityrider76
Re: Anyone have the correct Honda bullet connectors?
« Reply #12 on: August 18, 2016, 11:35:08 PM »
I just got a bunch from these guys. Not sure if they fit stock. But they look stock. Wish I had them befor I installed my Pamco Ignition. But I left the wires long for this reason.

http://www.vintagecb750.com/products/5/electrical/64/wire-terminals-couplers-fuse-boxes-fuses

Cheers,
78 CB750K
78 CB750K
78 CB750K
99 ZRX 1100