« previous next »
Pages: 1 ... 163 164 [165] 166 167 ... 195   Go Down

Author Topic: CB750A Street ET bracket drag bike. A year to build it.  (Read 626749 times)

0 Members and 1 Guest are viewing this topic.

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4100 on: April 09, 2014, 12:46:36 AM »
Look's like we're all heading off to the race's. :)
Ev, Newmo , and I will be on the way to the Victorian Titles tomorrow.
First time for me watching somebody else racing the old girl.
Not sure how that's going to go down. :(
Good luck gentlemen. ;)

Cheers,
Brian
Logged
The older I get the faster I was.

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,117
  • Sunny Central Florida
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4101 on: April 09, 2014, 03:44:43 AM »
The smell of nitro is in the air!  8)
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,930
  • Bought her new 4/75
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4102 on: April 09, 2014, 08:29:44 AM »
Just touched down. Sam I'd wait for you but I don't want to drink for 5 hours YET!
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4103 on: April 09, 2014, 08:43:51 AM »
K ;D
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4104 on: April 09, 2014, 09:49:45 AM »
Jerry, Sending you PM. PM me your cell number. Should be there tomorrow afternoon. Keith
Logged

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4105 on: April 10, 2014, 09:42:12 AM »
Quote from: bear on April 09, 2014, 12:46:36 AM
Look's like we're all heading off to the race's. :)
Ev, Newmo , and I will be on the way to the Victorian Titles tomorrow.
First time for me watching somebody else racing the old girl.
Not sure how that's going to go down. :(
Good luck gentlemen. ;)

Cheers,
Brian

Have fun mate, hope the weather is kind to you.

Sam.
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4106 on: April 10, 2014, 09:56:46 AM »
Bill has my number but anyone else if I can help with logistics at SGMSP
770-367-7320

Jim
Logged
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Online dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,145
  • CB750F Dragbike
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4107 on: April 10, 2014, 05:45:54 PM »
On the fence about coming. Lots going on here. If I do come it'll be without an SOHC unfortunately. Didn't get transmission squared away yet. Will let you guys know if we hit the road.
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,930
  • Bought her new 4/75
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4108 on: April 10, 2014, 05:49:02 PM »
More stories. 130 miles out. On our way.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4109 on: April 11, 2014, 03:00:21 AM »
Have fun fella's
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Online dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,145
  • CB750F Dragbike
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4110 on: April 11, 2014, 05:15:25 AM »
Priorities!!!
Logged

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4111 on: April 11, 2014, 06:35:12 AM »
Quote from: dragracer on April 11, 2014, 05:15:25 AM
Priorities!!!

Giving the Busa's a hard time. ;) ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline jweeks

  • Hot Shot
  • ***
  • Posts: 545
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4112 on: April 12, 2014, 04:15:50 PM »
Ok, in the absence of communication, I'm estimating that Sam ran a 12.28 time trial, dialed in with a 12.16 for the first round and a 12.08 second round. The longer that we don't hear from them, the better that they did. Bill is running about a 12.42 on Calendar Girl. So, how's my crystal ball doing? ::) ;)
Logged

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4113 on: April 12, 2014, 05:45:30 PM »
Not too bad. Bill ran a .015,RT,1.9xx 60ft,7.9xx 1/8 mile,12.3x 1/4. I had bye run until another rider showed, .015 best SET R/T for qualifying. Sam ran .106 R/T 2.3x 60 ft. 8.3x 1/8,93.76 mph 1/8.12.56 @114.49.Sam got me back in first rd, .008 R/T 12.25 dial in.2198 60ft,8.084,1/8,95.02 in 1/8!!!!!! New Samauto and Sam's PB in 1/8th! K. 12.727 1/4, won and chopped throttle! So not to be out done, I showed 'em!  ;D .028 R/T,.........bike launched went a foot or two, fell flat on its face...and stalled! :o Well I cranked it back, knew I was  still live...so rode on down the track, sightseeing, taking it easy,ran a 27.594 60ft!, finally it cleared out so I ran it out the back door for a new PB of..........42.713 for the WIN! ;D...he redlighted ! ::) Wow! K. Sam dialed a 12.25,R/T .103,2.29 60ft,8.23 1/8,94.51 mph 1/8,12.898 1/4 86.61 mph,other lane broke out and redlighted.So next rd, I ran 1.955 60ft,7.92, 1/8,12.329 109.89 mph against a 12.40 dial in, oh well, yes before I broke out, I redlighted, knew I'd break out, but knew I'd redlighted. Now the good news!
Sam's next run, 12.25 dial in,.085 R/T,2.011,1/8 7.836, new PB and Samauto best. Engine breaking in nicely. ;D 94.99 1/8 mph,.....12.06 and he chopped the throttle, would have been Samauto's first 11 second run! K.Mph was 112.07. Damn! Sam had him beat by .2411! Other lane also broke out, but by only.004! Overall probably our best Team day with Dragracer also laid down a 8.21 on a 8.20 index. Dave Fletcher and Jim F also won first rd Pro ET with 8.91 on a 8.90 index ,.006 light! Number 4 qualifier! Tired, burnt, hungry, but heading off to Hooters and we get to do it all again! We have good footage,yes Larry Larz from Mars hooked up my Go Pro, yeah baby. Thank you Larry. KMB 69 and wife and friend came, Wilbur's here, Mark52,met new owner of PMR, do you think just maybe I bought a new PM caliper, more braking surface than both Gremica's! Racer deal! Oh yes also 18mm left BRAKE master cylinder! Go Samauto! ;D. More later,some really good stories! The elusive 11 may happen tomorrow. Going to do all z little tricks......I can FIND .007! Bill
« Last Edit: April 12, 2014, 05:48:52 PM by Bill/BentON Racing »
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,930
  • Bought her new 4/75
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4114 on: April 12, 2014, 06:30:55 PM »
Someone should ask Bill about the trailer..
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline jweeks

  • Hot Shot
  • ***
  • Posts: 545
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4115 on: April 12, 2014, 07:03:08 PM »
Find .007 and Sam's only .053 over an 11 second time slip. ::) That launch that Sam did was his strongest at this event by a lot. That's what got him so close to an 11. If he ran 112 mph, he didn't cut the throttle much at the finish line. The Hondamatic will run quicker than 12.25 when totally warmed up with a couple of rounds run. Any long waits between rounds and it will also slow down over a tenth as it gets cold. Wish I could be there. Made progress assembling my 'matic here. Now waiting on Kenny for a better cam chain tensioner for my new motor. Good luck tomorrow!!
Logged

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4116 on: April 12, 2014, 07:53:03 PM »
Ok, me fuzzy math! ;D We will get there, but just want to go rounds again tomorrow, Bill
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,117
  • Sunny Central Florida
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4117 on: April 13, 2014, 04:02:41 AM »
More to come!

Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Leino

  • Not much of an
  • Expert
  • ****
  • Posts: 1,264
  • in drag racing since 2005
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4118 on: April 13, 2014, 12:25:52 PM »
Nice work Sam, Bill and Frank!
Sam told me he will NOT race in US anymore, perhaps I can find a way to make him come to Finland one more time with better luck and weather.

 -Juha
Logged

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4119 on: April 13, 2014, 12:59:04 PM »
Short race report, been awesome day again....not over yet...ok not over for Sammy! Reversal of last time. I went out in 2nd rd. Sam waiting for 3rd rd now!  8) I ran a .002 R/T best in SET qualifying! No bye, even number of racers! ;D. Sam ran a 12.05 second rd, new PB and Samauto's best ;D. Ran in front of me so I could GoPro it. Last thing I heard from Larry as he popped me visor down, Sam just ran 12.05! Yeh baby......so to salvage some respect, I dug deep, and now Calendars Girl's best ET was a 12.25... with the smoothbores! Went back to stock carbs yesterday morning, so what did the lights and slip say? Drum roll, 12.054. Yippee kye yeah! ??? So of course we compare, damn uppity Englishman....Sam 's slip 12.051, beat again by .003! ;D He's trying to get my R/T record also, he ran a .007 and .010 today. Mine was .002, .041, and z redlight. :D oh did I say Ricky Gadsen's boy from Japan pulled up beside him in first round on a ZX14 and behind him a ZX1200R to pick on Bill!
If they still running  they a little poorer! ;) I won by .022, Sam by more. ;D yeh we already broke our 95.02 mph, first run 1/8 mile time, new 1/8 mile record 95.2x. Sam ran 7.850,1/8, me 7.718! K.1.93 60 ft me, Sam 2.033. Damn, we broke it again ...now 95.38 mph!!!!!!!K. We actually dialed Sam a 11.96,ran the 12.05. Getting there, first run with a 11 second dial in! Sam 1000ft, 10.099, me 10.039! More later, gotta turn on the gas, cause someone keeps taking time off me lifespan by forgetting to turn it  on! Did it to me twice yesterday! ;D as the one responsible for state of tune, missing and spitting and popping ain't snap, crackle and pop to a tuner's ears!  ;D More later, gotta get Samauto ready....kick the tires and turn ON the gas!  Dave Fletcher just put BayBay Yarborough on the trailer in SComp. Sam beat him earlier in second rd of SET! He's a good rider! ;D  Dragracer's group doing well also. Man, what a good day! Bill and Sam and Team Sam Green. 8)
« Last Edit: April 13, 2014, 04:48:19 PM by Bill/BentON Racing »
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4120 on: April 13, 2014, 01:35:53 PM »
Awesome....sounds like great fun being had by all. 8) 8) 8) 8) 8) 8) 8) 8)
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline jweeks

  • Hot Shot
  • ***
  • Posts: 545
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4121 on: April 13, 2014, 01:49:59 PM »
Bill,
     You found your .007  ;)

     Unless the air temp drops another 25+ degrees, Sam won't see an 11 second time slip today. If he does, it's because of his Popeye's left fore arm/hand. Great lights and good racing for all there this weekend.
Logged

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4122 on: April 13, 2014, 03:58:49 PM »
Yes, and then some. Sam out on a red, -.005! Dave Fletcher just broke out by .006! Alli in all probably most successful weekend. Sam should have 62 points, me 42 in S ET. On to Virginia! K. ;D
Ian King put Spider-Man Larry McBride out in Top Fuel! Larry's first loss in Man Cup Top Fuel, way to go Ian! K. Off to Top Fuel finals!  ;D
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,812
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4123 on: April 13, 2014, 04:36:08 PM »
So SAM is still the MAN and now he's getting seriously FAST :) :) :) :) :)

And all are have a VERY GOOD TIME 8) 8) 8) That includes those of us depending on you to keep us happy 8) 8) 8)

Logged
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: CB750A Street ET bracket drag bike. A year to build it.
« Reply #4124 on: April 13, 2014, 04:46:16 PM »
Well, more good new last man in the MTC 5 second club.......Mr Ian King, just watched him put down a 5.878 @ 225.07! He is so nice, couldn't have scripted it much better! K, Bill
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE
Pages: 1 ... 163 164 [165] 166 167 ... 195   Go Up
« previous next »