Topic: Manufactures cup: Valdosta- April 8-10, 2016

[Medyo Bastos]

PhotoPhil got a nice shot of my front tire reaching for the sky Saturday:




    

yeah, looks like a pair of ariats too!

Great shot Wilbur   

[dragracer]

Wilbur is opening the door for all those others that are skeptical about trying. And being successful. Bring em out boys!

Determination!!!

Hey, how come everyone else's engine looks clean as a pin and mine is oily and ratty looking. Damn, I need to tighten up, y'all make me look like a redneck mechanic. Hahaha.

[madmtnmotors]

yeah, looks like a pair of ariats too!

Wolverines!

Hey, how come everyone else's engine looks clean as a pin and mine is oily and ratty looking. Damn, I need to tighten up, y'all make me look like a redneck mechanic. Hahaha.

I'll take win slips over good looks any day! 

Lord knows my looks won't get me far...     

[kmb69]

Wilbur is opening the door for all those others that are skeptical about trying. And being successful. Bring em out boys!

Spanky, we're looking for you to bring out that big bad 1000cc (or whatever it is) of yours too!     

[754]

 Lower the forks at the track, then move them down again for the ride home..

Check how high stock forks are above the triple tree.

[Bailgang]

Hold up guys, I think you're missing the whole point of the post.

I think anyone that misunderstood it, missed the incredible insight and value from a "voice of experience". Its not often that those who compete, willingly share good, simple advice on how to improve. And all the points you make could make serious differences in anyone's racing. I think you're a helluva nice guy for posting that actually (as if my opinion even counts). But I bet I'm not alone in my opinion of that post.

As Wilbur said much earlier, it wasn't his wallet in his front pocket... That is a clear admission of a newfound addiction  Spare the Viagra, spoil the Tree! eh, Wilbur?

I understood it clearly because I had the same issues with my F2 when I had it at the drag strip for the first time last year, my dismal ET's were mainly a result of my inexperience because up to that time I had never launched the bike hard from a standing stop so trying to find the right rpm to launch and how to properly release the clutch to avoid a wheelie or bog was all new to me ...... not to mention getting my feet back on the pegs quick enough to be ready for 2nd gear. After my drag strip adventure I did find some issues with the bike for example just for kicks I installed new clamps for the intake boots, I swear I had checked for vacuum leaks before and all seemed OK but the engine obviously did have a vac leak somewhere because simply installing those new clamps made a world of difference on how the engine runs and behaves and has essentially made the engine more predictable at launch which as Frank pointed out gives me the rider the ability to focus more on my launch technique.

[Jerry Rxman Griffin aka MuthaF'er]

Wilbur is opening the door for all those others that are skeptical about trying. And being successful. Bring em out boys!

Spanky, we're looking for you to bring out that big bad 1000cc (or whatever it is) of yours too!     

Hey Leroy, waiting for the thaw out from the recent and hopefully last blizzard. Last brief moment of firing it up I heard a dreaded squeal and had some weird bucking. I installed the chain and could then tighten the clutch nut but broke the damn lifter plate. Gotta check the lightened rotor to make sure it's tight too. Need to eliminate those 2 possibilities first. Probably a good thing I installed the frame kit!! Then back to the 900. Torquer vs high rpm HP. Gonna be fun to see how they dyno out and which wins out.

What about you?

Need a light weight trailer for the Vettes too. Maybe we can get a deal on trailers and hitches. 2 pack. Have you ever looked into it?

Plus you already have Medicare. I can start shopping in 2 weeks.

[kmb69]

.....
Need a light weight trailer for the Vettes too. Maybe we can get a deal on trailers and hitches. 2 pack. Have you ever looked into it?
.....

Ain't no way I'm putting a trailer on the back of my Vette. Maybe a trailer on the back of a big diesel truck big enough for the bikes AND the Vette. Gotta have a ride for dinner!     

[Jerry Rxman Griffin aka MuthaF'er]

No man, just a single bike collapsible trailer with a small tool box under the glass. What else should a racer need!?

[MRieck]

No man, just a single bike collapsible trailer with a small tool box under the glass. What else should a racer need!?

  According to the roadracers I used to work with I'd say a case of beer and a bag of weed.

[754]

 You forgot pit woofies...aka chicks...

[Jerry Rxman Griffin aka MuthaF'er]

No man, just a single bike collapsible trailer with a small tool box under the glass. What else should a racer need!?

  According to the roadracers I used to work with I'd say a case of beer and a bag of weed.

Hey, I will be driving from Colorado and not flying. Well...... flying low maybe.

[gschuld]

No man, just a single bike collapsible trailer with a small tool box under the glass. What else should a racer need!?

  According to the roadracers I used to work with I'd say a case of beer and a bag of weed.

I've been to a few vintage road race events in the last 2 years, and I have seen everything from little more than a bike in the back of a rusted out pickup with a few cans of gas and a toolbox(plus a case of beer and weed), to a million dollar Provost bus conversion pulling a huge enclosed trailer with enough gear on hand to build several spare bikes.

George

[bear]

No man, just a single bike collapsible trailer with a small tool box under the glass. What else should a racer need!?

  According to the roadracers I used to work with I'd say a case of beer and a bag of weed.

To right!

[madmtnmotors]

I have seen everything from little more than a bike in the back of a rusted out pickup with a few cans of gas and a toolbox

That about sums up my team!

[POPS 911]

Wibur:  You brought the grill to heat up the food so you could heat up the track =get that rev limiter on that bike. And thanks for the shade of your pop up that you and me sat under for 6-7 hours waiting.......... next round café.

[madmtnmotors]

Wibur:  You brought the grill to heat up the food so you could heat up the track =get that rev limiter on that bike. And thanks for the shade of your pop up that you and me sat under for 6-7 hours waiting.......... next round café.

I'm glad you could make it down, I enjoyed bench racing with you while we waited. All are welcome. The rev limiter is definitely on the list of "must have in place" before the next race. 

"Next Round Café"... that has a nice ring to it, might have to have a sign made up.    As long as that doesn't turn me into a café racer!