Author Topic: What is that coming out of the sea......Oh No!!! It's GODZILLA!!! 2015 Ride  (Read 34135 times)

0 Members and 2 Guests are viewing this topic.

Offline DaSchwartz

  • Full Member
  • *
  • Posts: 27
  • No matter where you go, There you are...
Who's down to make this happen one more time?

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
I have Leftie....

He's been living in the rafters....
Stranger in a strange land

Offline madmtnmotors

  • When did I get to be a
  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 6,090
  • Sunny Central Florida
Dust him off! Let's get the bikes and cameras rolling!
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,902
  • Bought her new 4/75
I'm in to help. We need to get an idea of the players and formulate a ride idea. Drum it up to bring the wannabes and the riders outta the wood work.

Japan is covered it looks like. Italian Tom in Japan can formulate the Rising Sun leg.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,786
  • Northern Virginia
Looks like PZ is going from CA to Texas soon.

Offline ofreen

  • Old Timer
  • ******
  • Posts: 4,007
I'm in as usual.
Greg
'75 CB750F

"I would rather have questions I cannot answer than answers I cannot question." - Dr. Wei-Hock Soon

Offline Mooshie

  • Expert
  • ****
  • Posts: 1,037
Yup.  PZ is resting in Santa Barbara on his way east in March. He is ready to ride--but I am still in the process of planning the route.  It keeps changing.  What is unchangeable is this> CA to Felicity, CA> Yuma, AZ>Tombstone, Az>Bisbee> Silver city NM>Truth or Consequences, NM>Sante Fe, NM.  Now deciding about Texas or Colorado then definitely back to AZ for a run to the Grand Canyon south entrance then back to Santa Barbara.
Let's get 2015 going.  We can have all three pass in one state  :)
1976 CB550F
Standard disclaimer: Remember I am just a girl--so be nice fellows!

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,786
  • Northern Virginia
I am in, but he has always problem crossing to the East  :(

Offline Mooshie

  • Expert
  • ****
  • Posts: 1,037
I am trying to post to the 2015 new topic but it is not allowing me so this is a test... :)
1976 CB550F
Standard disclaimer: Remember I am just a girl--so be nice fellows!

Offline Mooshie

  • Expert
  • ****
  • Posts: 1,037
Okay so that worked perfectly.  Here is what I wanted to post on the 2015 new topic thread (that is not cooperating).  If someone can move it to that thread that would be fantastic.

Pimpzilla is ready to leave CA---

Well in one month that is...Pimpzilla and I will be leaving Santa Barbara, CA on March 14th and taking a wide loop around AZ, NM, CO, and back to AZ and home in CA.  The plan is to be back by 3/24

Here is the tentative schedule:

3/14 Santa Barbara to Yuma AZ
3/15 Yuma>Gila Bend> Tombstone AZ
3/16 Tombstone > Gleeson>Douglas AZ
3/17 Douglas> Portal>Silver City, NM>Truth or Consequences NM
3/18 Truth or C > Albuquerque>Santa Fe>...
then I lose track of time but the rough idea is
Santa Fe NM> Trinidad CO> Cortez CO>Grand Canyon AZ>CA

If anyone wants to pick up/meet up with PZ and me I am ready to pass him off anytime after Tombstone (I promised PZ we would go there together). Perhaps another "region" wants to take him east or north?  I am fine taking him back with me to CA as we have bonded in the last few months.

Let me know thoughts!
1976 CB550F
Standard disclaimer: Remember I am just a girl--so be nice fellows!

Offline madmtnmotors

  • When did I get to be a
  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 6,090
  • Sunny Central Florida
Re: What is that coming out of the sea......Oh No!!! It's GODZILLA!!! 2015 Ride
« Reply #10 on: February 17, 2015, 07:21:08 PM »
Okay so that worked perfectly.  Here is what I wanted to post on the 2015 new topic thread (that is not cooperating).  If someone can move it to that thread that would be fantastic.

Pimpzilla is ready to leave CA---

Well in one month that is...Pimpzilla and I will be leaving Santa Barbara, CA on March 14th and taking a wide loop around AZ, NM, CO, and back to AZ and home in CA.  The plan is to be back by 3/24

Here is the tentative schedule:

3/14 Santa Barbara to Yuma AZ
3/15 Yuma>Gila Bend> Tombstone AZ
3/16 Tombstone > Gleeson>Douglas AZ
3/17 Douglas> Portal>Silver City, NM>Truth or Consequences NM
3/18 Truth or C > Albuquerque>Santa Fe>...
then I lose track of time but the rough idea is
Santa Fe NM> Trinidad CO> Cortez CO>Grand Canyon AZ>CA

If anyone wants to pick up/meet up with PZ and me I am ready to pass him off anytime after Tombstone (I promised PZ we would go there together). Perhaps another "region" wants to take him east or north?  I am fine taking him back with me to CA as we have bonded in the last few months.

Let me know thoughts!

Sounds like a great kick-off, might be hard to match!

The 2015 board is new, and I was not able to start a new thread either. I'll give it a day and then reach out to the powers that be if it's still no-worky. Been some wonkiness on the forum lately, must be ghosts in the machine!
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Hope

  • How did I become an
  • Expert
  • ****
  • Posts: 1,042
  • SOHC member since '01
Great to see 2015 kicking off! Am I still the only girl who has given GZ a ride? Ya'll know he needed to be cleaned up and needed a spa day :P

« Last Edit: March 11, 2015, 01:52:19 PM by Hope »

Offline Mooshie

  • Expert
  • ****
  • Posts: 1,037
Nope.  I have PZ presently and he is ready to ride with me through the southwest on 3/13/15 to 3/24/15.  Unfortunately no one is offering to pick him up and carry him further east or north.  I also carried the original GZ (on the first relay for Central CA) and Leftie (on the 2nd one) when they traveled west. 
1976 CB550F
Standard disclaimer: Remember I am just a girl--so be nice fellows!

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
PZ has arrived on the east coast of Canada! Welcome to the fog belt, PZ! I'll take him for a little tour soon, and I can do a hand-off as far south as Bangor, ME. I am picking up some parts in Calais in a few weeks (early June, likely) so if someone wants to do that direction that would be cool.

OR

If someone wants to take PZ further north/west (Quebec, Ontario, etc), I'd be happy to make a trip to northern New Brunswick.




--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
The Wife was not impressed... we just got home from vacation and were not expecting a house guest.

--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline madmtnmotors

  • When did I get to be a
  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 6,090
  • Sunny Central Florida
Might want to reach out to our Michigan riders, they are often looking for a reason to do a "lap around the lake"!  8)
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Mooshie

  • Expert
  • ****
  • Posts: 1,037
Evanphi:
I am so glad you got PZ.  I saw through tracking that he was in Canada but no one there to receive him (sorry he missed your deadline by one day).  He hates traveling by box!
Also, I forgot to send along the book that goes with PZ.  I will wait until he gets to the USA though to send it (I should have ridden him out to you in Canada it would have been cheaper  ::) )
Or I am coming through in September and can just bring you the book so keep a log for yourself so you can add it in there.
Tell your wife PZ will grow on her he is very lovable if not a tad fancy.
1976 CB550F
Standard disclaimer: Remember I am just a girl--so be nice fellows!

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
Yes when I saw the date on the "missed delivery" slip I got I was a little bummed. Oh well!

My daughter has taken to PZ. Pics to come...
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
did someone say LAP AROUND THE LAKE????I am in
don't buy it build it

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case


"Whats this outside? We never had it the last place I stayed..."
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case


PZ came to work!
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline RevDoc

  • Hot Shot
  • ***
  • Posts: 556
I'm game for a leg of the trip if it runs near the Philly, PA area.

Hey, Chewie! You or any of the other SOHC gang near Syracuse interested? I could make a run up  to visit my brother and meet up with you for the central NY area and pick up "His Lizardness".
« Last Edit: May 23, 2015, 03:51:22 PM by RevDoc »
Dana

'78 CB550K--Angie
'82 CB750 Custom--Eva



As soon as you straddle a bike expect every other driver on the road to suddenly start competeing for the title "Dumbestsonofa#$%*inallNorthAmerica!!"

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
So who wants to meet me in the Bangor ME area to continue PZs trip? As long as I have a 2 week notice, I can meet you on a Saturday.

Maybe once we know who will be meeting me, Mooshie can send the log book so I can sign it?
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
So who wants to meet me in the Bangor ME area to continue PZs trip? As long as I have a 2 week notice, I can meet you on a Saturday.

Maybe once we know who will be meeting me, Mooshie can send the log book so I can sign it?

UPDATE: So long as I have enough notice, I can make this trip any day of the week EXCEPT FRIDAYS. I'll just need to schedule the vacation time.



PZ will be my passenger/buddy on Saturday for the 2015 Ride for Dad. Photos to come!
http://support.pcff.ca/site/TR?fr_id=1340&pg=entry

I have pledged to raise 50$ for Prostate Cancer Research in New Brunswick... if you would like to donate, please visit here: http://support.pcff.ca/site/TR/RideforDad2015/MRFD_General?px=1093075&pg=personal&fr_id=1340

Thanks!
« Last Edit: June 03, 2015, 05:53:37 AM by evanphi »
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
you got me for $10 good luck
don't buy it build it